Walt Mankowski on Tue, 31 Aug 1999 20:59:17 -0400 (EDT) |
On Tue, Aug 31, 1999 at 07:26:39PM -0500, Morgan Wajda-Levie wrote: > I'll be taking the train in to Philadelphia for the meeting tomorrow, > but I don't really know where I'm going. Does anybody know of the > best train to take from West Chester, and to which station? And are > there any funky tricks to get from the station to the meeting? I don't think Septa runs trains all the way out to West Chester anymore. There's a station in town but last time I drove by it was deserted. Your best bet is probably to take the R5 from either Exton or Paoli, or the old West Chester line from whatever's the end of the line now (Elwyn?). You can find schedules at www.septa.org. Whichever train you take, ride it eastbound towards downtown Philly and get off at 30th St. Station. Steinberg-Dietrich Hall is about a 20 minute walk from the station. The simplest way to walk is to head west on Market (away from Center City) 6 blocks to 36th St., then turn left. You'll cross Chesnut, Sansom, and Walnut Sts. 36th becomes pedestrian-only after Walnut as it enters Penn's campus. Continue one more block to Locust (that's the main pedestrian walkway through campus) and turn right. Steinberg-Dietrich Hall will be the big building on your left. You can save yourself a little time by cutting diagonally through Drexel and then entering Penn at 34th and Walnut. You can also take the Subway-Surface (the "green line") west from 30th St. to 37th., which is practically right outside Steinberg-Dietrich. If you can't find it when you exit the station, just about any passer-by should be able to point you in the right direction. One thing to be aware of in taking the green line is that one of the lines (there are 4 or 5 lines that follow similar routes through University City) doesn't stop at 37th. It's been a while, but I think the line to avoid is the #10. Good luck! Walt _______________________________________________ Plug maillist - Plug@lists.nothinbut.net http://lists.nothinbut.net/mail/listinfo/plug
|
|