Re: [PLUG] NIC driver installation howto? (newbieish level help needed)

[Paul <emailme@dpagin.net>]

kaze wrote:

> [root@sa root]# ping 10.10.10.50
> PING 10.10.10.50 (10.10.10.50) 56(84) bytes of data.
> 64 bytes from 10.10.10.50: icmp_seq=1 ttl=64 time=0.066 ms
> 64 bytes from 10.10.10.50: icmp_seq=2 ttl=64 time=0.054 ms
> 64 bytes from 10.10.10.50: icmp_seq=3 ttl=64 time=0.064 ms
>
> [root@sa root]# ping 10.10.10.211
> PING 10.10.10.211 (10.10.10.211) 56(84) bytes of data.
> > From 10.10.10.50 icmp_seq=1 Destination Host Unreachable
> > From 10.10.10.50 icmp_seq=2 Destination Host Unreachable
> > From 10.10.10.50 icmp_seq=3 Destination Host Unreachable
>  

Are you connected through a hub or switch, or directly using a 
cross-connected cable?

That IP address looks a little strange, doesn't it?

___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug