Chris Mann on Thu, 22 May 2003 14:46:36 -0400


[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

Re: [PLUG] Sendmail question


Sure, here's the sendmail.mc file with the specific address etc
censored:

divert(-1)dnl
dnl #
dnl # This is the sendmail macro config file for m4. If you make
changes to
dnl # /etc/mail/sendmail.mc, you will need to regenerate the
dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf
package is
dnl # installed and then performing a
dnl #
dnl #     make -C /etc/mail
dnl #
include(`/usr/share/sendmail-cf/m4/cf.m4')dnl
VERSIONID(`setup for Red Hat Linux')dnl
OSTYPE(`linux')dnl
dnl #
dnl # Uncomment and edit the following line if your outgoing mail needs
to
dnl # be sent out through an external mail server:
dnl #
define(`SMART_HOST',`mail.relay.server')
dnl #
define(`confDEF_USER_ID',``8:12'')dnl
define(`confTRUSTED_USER', `smmsp')dnl
dnl define(`confAUTO_REBUILD')dnl
define(`confTO_CONNECT', `1m')dnl
define(`confTRY_NULL_MX_LIST',true)dnl
define(`confDONT_PROBE_INTERFACES',true)dnl
define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl
define(`ALIAS_FILE', `/etc/aliases')dnl
dnl define(`STATUS_FILE', `/etc/mail/statistics')dnl
define(`UUCP_MAILER_MAX', `2000000')dnl
define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl
define(`confPRIVACY_FLAGS',
`authwarnings,novrfy,noexpn,restrictqrun')dnl
define(`confAUTH_OPTIONS', `A')dnl
dnl #
dnl # The following allows relaying if the user authenticates, and
disallows
dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links
dnl #
dnl define(`confAUTH_OPTIONS', `A p')dnl
dnl #
dnl # PLAIN is the preferred plaintext authentication method and used
by
dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs
do
dnl # use LOGIN. Other mechanisms should be used if the connection is
not
dnl # guaranteed secure.
dnl #
dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5
LOGIN PLAIN')dnl
dnl #
dnl # Rudimentary information on creating certificates for sendmail
TLS:
dnl #     make -C /usr/share/ssl/certs usage
dnl #
dnl define(`confCACERT_PATH',`/usr/share/ssl/certs')
dnl define(`confCACERT',`/usr/share/ssl/certs/ca-bundle.crt')
dnl define(`confSERVER_CERT',`/usr/share/ssl/certs/sendmail.pem')
dnl define(`confSERVER_KEY',`/usr/share/ssl/certs/sendmail.pem')
dnl #
dnl # This allows sendmail to use a keyfile that is shared with
OpenLDAP's
dnl # slapd, which requires the file to be readble by group ldap
dnl #
dnl define(`confDONT_BLAME_SENDMAIL',`groupreadablekeyfile')dnl
dnl #
dnl define(`confTO_QUEUEWARN', `4h')dnl
dnl define(`confTO_QUEUERETURN', `5d')dnl
dnl define(`confQUEUE_LA', `12')dnl
dnl define(`confREFUSE_LA', `18')dnl
define(`confTO_IDENT', `0')dnl
dnl FEATURE(delay_checks)dnl
FEATURE(`no_default_msa',`dnl')dnl
FEATURE(`smrsh',`/usr/sbin/smrsh')dnl
FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
FEATURE(redirect)dnl
FEATURE(always_add_domain)dnl
FEATURE(use_cw_file)dnl
FEATURE(use_ct_file)dnl
dnl #
dnl # The -t option will retry delivery if e.g. the user runs over his
quota.
dnl #
FEATURE(local_procmail,`',`procmail -t -Y -a $h -d $u')dnl
FEATURE(`access_db',`hash -T<TMPF> -o /etc/mail/access.db')dnl
FEATURE(`blacklist_recipients')dnl
EXPOSED_USER(`root')dnl
dnl #
dnl # The following causes sendmail to only listen on the IPv4 loopback
address
dnl # 127.0.0.1 and not on any other network devices. Remove the
loopback
dnl # address restriction to accept email from the internet or
intranet.
dnl #
dnl DAEMON_OPTIONS(`Port=smtp,Addr=xxx.xxx.xxx.xxx, Name=MTA')dnl
dnl #
dnl # The following causes sendmail to additionally listen to port 587
for
dnl # mail from MUAs that authenticate. Roaming users who can't reach
their
dnl # preferred sendmail daemon due to port 25 being blocked or
redirected find
dnl # this useful.
dnl #
dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl
dnl #
dnl # The following causes sendmail to additionally listen to port 465,
but
dnl # starting immediately in TLS mode upon connecting. Port 25 or 587
followed
dnl # by STARTTLS is preferred, but roaming clients using Outlook
Express can't
dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use
STARTTLS
dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses
smtps
dnl # when SSL is enabled-- STARTTLS support is available in version
1.1.1.
dnl #
dnl # For this to work your OpenSSL certificates must be configured.
dnl #
dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl
dnl #
dnl # The following causes sendmail to additionally listen on the IPv6
loopback
dnl # device. Remove the loopback address restriction listen to the
network.
dnl #
dnl # NOTE: binding both IPv4 and IPv6 daemon to the same port
requires
dnl #       a kernel patch
dnl #
dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl
dnl #
dnl # We strongly recommend not accepting unresolvable domains if you
want to
dnl # protect yourself from spam. However, the laptop and users on
computers
dnl # that do not have 24x7 DNS do need this.
dnl #
FEATURE(`accept_unresolvable_domains')dnl
dnl #
FEATURE(`relay_based_on_MX')dnl
dnl #
dnl # Also accept email sent to "localhost.localdomain" as local
email.
dnl #
dnl LOCAL_DOMAIN(`localhost.localdomain')dnl
dnl #
dnl # The following example makes mail from this host and any
additional
dnl # specified domains appear to be sent from mydomain.com
dnl #
dnl MASQUERADE_AS(`mydomain.com')dnl
dnl #
dnl # masquerade not just the headers, but the envelope as well
dnl #
dnl FEATURE(masquerade_envelope)dnl
dnl #
dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com
as well
dnl #
dnl FEATURE(masquerade_entire_domain)dnl
dnl #
dnl MASQUERADE_DOMAIN(localhost)dnl
dnl MASQUERADE_DOMAIN(mydomain.com)dnl
dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl
dnl MASQUERADE_DOMAIN(mydomain.lan)dnl
MAILER(smtp)dnl
MAILER(procmail)dnl




>>> mct@toren.net 05/22/03 01:57PM >>>
> I'm trying to configure sendmail to relay through our current
system.
> When sending a message, it recieves the message fine, however when
> sending it out to the relay it mangles the address to
> user@domain.com.domain.com. Any idea on where to fix this at?

Can you share with us a copy of your sendmail.mc file?

-mct
_________________________________________________________________________
Philadelphia Linux Users Group        --      
http://www.phillylinux.org 
Announcements -
http://lists.netisland.net/mailman/listinfo/plug-announce 
General Discussion  --  
http://lists.netisland.net/mailman/listinfo/plug
_________________________________________________________________________
Philadelphia Linux Users Group        --       http://www.phillylinux.org
Announcements - http://lists.netisland.net/mailman/listinfo/plug-announce
General Discussion  --   http://lists.netisland.net/mailman/listinfo/plug