Re: Fwd: Re: [PLUG] SCSI tape question

[Jeff Dean <jdean@ieee.org>]

At 3/10/01 02:01 PM, you wrote:
>jdean@ieee.org (Jeff Dean) writes:
>> I sent prematurely.  That grep command should be:
>> >  [root@smp /root]# grep tape /var/log/messages*
>Depending on how syslogd is configured, I think you might miss
>that.  If that's the case, also check:
>  % dmesg | grep tape

Yup, that was in my original message.

>or
>  % more /proc/scsi/scsi

There's no device name listed there on my RH7 system:

  [root@smp /root]# more /proc/scsi/scsi
  Attached devices:
  Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: IBM      Model: DGVS09U          Rev: 03B0
    Type:   Direct-Access                    ANSI SCSI revision: 03
  Host: scsi1 Channel: 00 Id: 01 Lun: 00
    Vendor: YAMAHA   Model: CRW6416S         Rev: 1.0c
    Type:   CD-ROM                           ANSI SCSI revision: 02
  Host: scsi1 Channel: 00 Id: 03 Lun: 00
    Vendor: HP       Model: C1553A           Rev: 9608
    Type:   Sequential-Access                ANSI SCSI revision: 02
  Host: scsi1 Channel: 00 Id: 04 Lun: 00
    Vendor: HP       Model: C2500A           Rev: 3332
    Type:   Processor                        ANSI SCSI revision: 02              

jd



Jeff Dean
jdean@ieee.org


______________________________________________________________________
Philadelphia Linux Users Group       -      http://www.phillylinux.org
Announcements-http://lists.phillylinux.org/mail/listinfo/plug-announce
General Discussion  -  http://lists.phillylinux.org/mail/listinfo/plug