Re: [PLUG] Epson USB scanner trouble

[Sandhitsu R Das <sudas@seas.upenn.edu>]

I didn't have the usb-uhci module loaded it seems. Now I can see the
scanner in /proc/bus/usb/devices

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=04b8 ProdID=0101 Rev= 1.04
S:  Manufacturer=EPSON
S:  Prfs= 1 Cfg#= 1 Atr=40 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms


But with the messages file saying:

Apr  3 19:34:32 ribhu kernel: usb_control/bulk_msg: timeout

And scanimage -L hangs.


On Tue, 3 Apr 2001, Sandhitsu R Das wrote:

> > 
> > It is - I have one, and mine works fine. Altho I'm using kernel 2.2.18.
> > 
> > If you have a problem with the "minor number", tho, I would check the perms
> > on the /dev/usbscanner entry.
> > 
> > I use /dev/usb/scanner0 (not the /dev/usbscanner, like the example shows),
> > and mine looks like this:
> > 
> > crw-rw----    1 root     root     180,  48 Sep 27  2000 scanner0
> > 
> 
> I'm using /dev/scanner in /etc/sane.d/epson.conf.
> 
> crw-rw-rw-    1 root     root     180,  48 Apr  3 03:31 scanner
> 
> > 
> > [root@minas-aran usb]# scanimage -L
> > device `epson:/dev/usb/scanner0' is a Epson Perfection636 flatbed scanner
> > 
> 
> scanimage -L doesn't list anything though.
> 
> 


______________________________________________________________________
Philadelphia Linux Users Group       -      http://www.phillylinux.org
Announcements-http://lists.phillylinux.org/mail/listinfo/plug-announce
General Discussion  -  http://lists.phillylinux.org/mail/listinfo/plug