|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
[PLUG] experience with the HP 2100C scanner?
|
hey,
does anyone out there have experience with the HP2100C scanner and
using it in linux? it's USB, but Debian Potato (2.2.18pre21) seems to
be fine with that. at least...:
orange:~# lsmod
Module Size Used by
...
scanner 4228 0 (unused)
usbcore 41804 0 [usbkbd scanner usbmouse]
...
and
orange:/lib/modules/2.2.18pre21/usb# ls {scanner,usb*}.o
scanner.o usb-storage.o usbcore.o usbmouse.o
usb-ohci.o usb-uhci.o usbkbd.o usbserial.o
furthermore, SANE 1.04 is installed.
but:
orange:/usr/local/bin# find-scanner
# If your scanner uses SCSI, you must have a driver for your SCSI
# adaptor and support for SCSI Generic (sg) in your Operating System
# in order for the scanner to be used with SANE. If your scanner is
# NOT listed above, check that you have installed the drivers.
orange:/usr/local/bin# ./scanimage -L
No scanners were identified. If you were expecting something
different,
check that the scanner is plugged in, turned on and detected by the
find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
of course, the scanner is on and connected, but /proc/bus/usb, even
though it exists, is empty.
i'd much rather not switch to 2.4.2 until there is a nice debian
package for it. so how can i do it? why is usb working with
2.2.18pre21 in the first place? and where to go from there?
martin; (greetings from the heart of the sun.)
\____ echo mailto: !#^."<*>"|tr "<*> mailto:" net@madduck
--
"this week dragged past me so slowly;
the days fell on their knees..."
-- david bowie
______________________________________________________________________
Philadelphia Linux Users Group - http://www.phillylinux.org
Announcements-http://lists.phillylinux.org/mail/listinfo/plug-announce
General Discussion - http://lists.phillylinux.org/mail/listinfo/plug
|
|