|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] Can't seem to change my resolv.conf ...
|
On 1/17/08, Matt Mossholder <matt@mossholder.com> wrote:
> I believe they go into /etc/network/interfaces, like such:
>
> ======================
>
> # This file describes the network interfaces available on your system
> # and how to activate them. For more information, see interfaces(5).
>
> # The loopback network interface
> auto lo
> iface lo inet loopback
>
> # This is a list of hotpluggable network interfaces.
> # They will be activated automatically by the hotplug subsystem.
>
> auto eth1
> # The primary network interface
> iface eth1 inet static
> address 192.168.0.2
> netmask 255.255.255.0
> network 192.168.0.0
> broadcast 192.168.0.255
> gateway 192.168.0.254
> dns-nameservers 192.168.0.5 192.168.0.3
> dns-search mossholder.com
I don't have dns info in that file. Never did ...
auto eth0
iface eth0 inet static
address 10.0.0.20
netmask 255.255.255.0
broadcast 10.0.0.255
gateway 10.0.0.2
___________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|