|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] VMWare Workstation Bridged Mode Question
|
----- Original Message -----
From: Gordon Dexter
> Yes, you should be able to do it. I've seen it done, or at least
> something very similar, so that a bunch of vmware machines were on a
> local subnet. The instructions should be as simple as "set static IP,
>
> set to bridged mode".
----- Original Message -----
Worked perfectly, it is up now and running, so thanks Gordon and Richard.
It appears all the trouble was caused by trying to do a net install in bridged mode. For the initial net install I just switched to NAT mode. Once installed, I set my static ip on the guest, and set vmware to bridged, and the OS is off and running on the WAN.
--------------------------------------------------
Brian Vagnoni
PGP Digital Fingerprint
F076 6EEE 06E5 BEEF EBBD BD36 F29E 850D FC32 3955
--------------------------------------------------
___________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|