[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Weather station cont. V2

Well "no space at the inn". 
It is crowded and no tables. 
I'm going to get lunch and try back 1230 or 1


On Thu, Dec 12, 2019, 1:50 PM tom r lopes <tomrlopes@gmail.com> wrote:
I will be at Blue Door this Sunday the 15th. 

Continue work on Raspberry Pi weather station. 
Last Pi meeting Bob gifted a weather station that uses them 1-wire protocol. The Pi can do 1 wire on gpio4. You would needs to enable it in raspi-config. I looked really quick on the protocol: actually requires 2 wires but one is data.  It is pretty cool the sensors are Daisy chained and I'd themselves. In the Pi look at /sys/bus/w1/devices. 

So these weather station use telephone cables to interconnect.  Rj11. So I ordered a rj11 breakout which means you don't need to cut the cables. I'll order another one for Bob's station so you could hook it up easily with a breadboard. 

All are welcome to attend. Linux Pi Arduino hardware hacking. 

I may be a little late as this is the busy season at work. Give me till noon to show. 


You received this message because you are subscribed to the Google Groups "BerkeleyLUG" group.
To unsubscribe from this group and stop receiving emails from it, send an email to berkeleylug+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/berkeleylug/CAGpvfsoyDRi6OBJ79086j62yAc6822-8p_Z7arzGHOo_6x11og%40mail.gmail.com.