[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Weather station cont. V2



Well it is a wash this week. 

No free tables at all. VR guy is here though in his usual spot

See you guys next week

Thomas

On Sun, Dec 15, 2019, 11:37 AM tom r lopes <tomrlopes@gmail.com> wrote:
Well "no space at the inn". 
It is crowded and no tables. 
I'm going to get lunch and try back 1230 or 1

Thomas

On Thu, Dec 12, 2019, 1:50 PM tom r lopes <tomrlopes@gmail.com> wrote:
I will be at Blue Door this Sunday the 15th. 

Continue work on Raspberry Pi weather station. 
Last Pi meeting Bob gifted a weather station that uses them 1-wire protocol. The Pi can do 1 wire on gpio4. You would needs to enable it in raspi-config. I looked really quick on the protocol: actually requires 2 wires but one is data.  It is pretty cool the sensors are Daisy chained and I'd themselves. In the Pi look at /sys/bus/w1/devices. 

So these weather station use telephone cables to interconnect.  Rj11. So I ordered a rj11 breakout which means you don't need to cut the cables. I'll order another one for Bob's station so you could hook it up easily with a breadboard. 

All are welcome to attend. Linux Pi Arduino hardware hacking. 

I may be a little late as this is the busy season at work. Give me till noon to show. 

Thomas

--
You received this message because you are subscribed to the Google Groups "BerkeleyLUG" group.
To unsubscribe from this group and stop receiving emails from it, send an email to berkeleylug+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/berkeleylug/CAGpvfspQ7yesh6r4cp1adPAoCPryRsiYtJkDV%2BB1u%3DWM5vL25A%40mail.gmail.com.