|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
thanks for the advice
i am using aha1740.s and color.gz
i get the messsage
aha174x: Board detected, but EBCNTRL = 0, so disable it.
scsi : 0 hosts.
scsi : detected total.
Partition check:
VFS: Insert..~..press ENTER
-----Original Message-----
From: plug-admin@lists.nothinbut.net
[mailto:plug-admin@lists.nothinbut.net]On Behalf Of Alexander John Batyi
Sent: Thursday, July 22, 1999 10:11 AM
To: plug@lists.nothinbut.net
Subject: Re: [Plug] adaptec 1742
>
> I can boot with my adaptec 1742 scsi card using slackware boot and root
> disks. Fdisk will not see the scsi disk. Dos will see the scsi disk and
> Novell 3.11 will see the scsi disk. Am I missing some parameters or
jumper
> settings.
>
Whichimage did you use for the boot disk?
They all end in .i or .s; The .i for example in net.i is the IDE
networking kernel anything with .s kernels support SCSI. In the
bootdsks.144 directory read WHICH.ONE and any other text files.
_______________________________________________
Plug maillist - Plug@lists.nothinbut.net
http://lists.nothinbut.net/mail/listinfo/plug
_______________________________________________
Plug maillist - Plug@lists.nothinbut.net
http://lists.nothinbut.net/mail/listinfo/plug
|
|