|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [Plug] Error messages
|
It would help if you would include some of the error messages
Also when Linux boots there are a plethora of messages that tell you what is
going on. These are not error messages, but boot messages that you can refer to
after the system is running. If something is not working on your system you can
refer to these messages with dmesg or by looking in /var/log/
They look like:
Detected 75001340 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 29.90 BogoMIPS
Memory: 62480k/65536k available (1316k kernel code, 412k reserved, 1280k data,
48k init)
CPU: Intel Pentium 75 - 200 stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xf95c0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IPv4 over IPv4 tunneling driver
early initialization of device tunl0 is deferred
Initializing RT netlink socket
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,PS2]
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
Sound initialization started
<Sound Blaster 16 (4.13)> at 0x220 irq 10 dma 1,5
<Sound Blaster 16> at 0x330 irq 10 dma 0
Sound initialization complete
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.19
hda: WDC AC31000H, ATA DISK drive
hdb: CD-ROM 48X/AKU, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: WDC AC31000H, 1033MB w/128kB Cache, CHS=525/64/63
hdb: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
aha152x: BIOS test: passed, auto configuration: ok, detected 1 controller(s)
aha152x0: vital data: PORTBASE=0x340, IRQ=9, SCSI ID=7, reconnect=enabled,
parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
aha152x: trying software interrupt, ok.
scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 2 hosts.
Vendor: QUANTUM Model: FIREBALL ST4.3S Rev: 0F0C
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300U
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: SyQuest Model: SyJet-S Rev: 0111
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sdc at scsi0, channel 0, id 2, lun 0
scsi : detected 3 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8471232 [4136 MB] [4.1 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4124736 [2014 MB] [2.0 GB]
> William Rivera wrote:
>
> Dear friends:
> I am trying to install Slackware in a 486 but I get a lot of error messages
> after I use the booting disk. I suspect an IRQ conflict. Any suggestions or
> ideas?
> William
--
0 0 L & R Associates
" Home Page: http://www.netaxs.com/~ldc/
_______ooO ~ Ooo_______________________________________________
LeRoy D. Cressy /\_/\ mailto:ldc@netaxs.com
Computer Consulting ( o.o ) Phone (215) 535-4037
> ^ < Fax (215) 535-4285
_______________________________________________
Plug maillist - Plug@lists.nothinbut.net
http://lists.nothinbut.net/mail/listinfo/plug
|
|