eric@lucii.org on Sat, 25 May 2002 11:10:48 -0400 |
Chris: I too had to find a scsi card on a budget about 18 months ago. Adaptec was too expensive but I found another card that works really well. Unfortunately, I cannot tell you the exact name and model without rebooting :-( But, I believe the name is like "Advan-sys" and it was about $90 - $ 110 IIRC. Check the SCSI hardware compatability list for Linux - I found it there and bought it online. Eric On Sat, May 25, 2002 at 08:25:49AM -0600, W. Chris Shank wrote: > I can't seem to use the scsi the drives i salvaged from an AS/400. My > current controller is an adaptec aha-2940W that can go up to 20MB.sec. it > has 50 pin and 68 pin internal conectors and a 68pin external. it can handle > up to 15 devices. however, the manufacturer says that it can only recognize > up 8G drives, and i think that the scsi drives are 9.1G - but the controller > thinks they are 4.3G. Also, the drives are recognized as capable of 40MB/sec. > > I can see the disk on the scsi bus but cannot fdisk it at all (in either dos > or linux). i figure it's either a firmware issue leftover from the AS/400 or > it's the controller. > > I need to find a scsi controller that will be compatible with these drives, > without breaking the bank. can anyone recommend a model that i might be able > to find used, that would meet the 40Mb/sec spec? > > thanks > > > ______________________________________________________________________ > Philadelphia Linux Users Group - http://www.phillylinux.org > Announcements-http://lists.phillylinux.org/mail/listinfo/plug-announce > General Discussion - http://lists.phillylinux.org/mail/listinfo/plug -- # Eric Allan Lucas #------------------- # Support Ken Krawchuk - Libertarian for Governor of Pennsylvania! # Find out how YOU can help -> http://www.kenk.org #------------------- ______________________________________________________________________ Philadelphia Linux Users Group - http://www.phillylinux.org Announcements-http://lists.phillylinux.org/mail/listinfo/plug-announce General Discussion - http://lists.phillylinux.org/mail/listinfo/plug
|
|