|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] hdparm problem
|
Paul:
hdparm -d1 -X68 /dev/hde
(ATA66)
hdparm -d1 -X69 /dev/hde
(ATA100)
Jesse
Paul wrote:
>>
>>
>> hdparm -c1 /dev/hde
>>
> Try -c3
>
>> hdparm -d1 -X66 /dev/hde
>>
> Does -X66 set the drive to ATA66 mode? I've never used that switch.
> That's what I would suspect is causing the problem since I've never
> had a problem when not using it.
>
> Is there a problem if you manually enter the command after boot?
>
>
> _________________________________________________________________________
> Philadelphia Linux Users Group -- http://www.phillylinux.org
> Announcements - http://lists.netisland.net/mailman/listinfo/plug-announce
> General Discussion -- http://lists.netisland.net/mailman/listinfo/plug
>
_________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.netisland.net/mailman/listinfo/plug-announce
General Discussion -- http://lists.netisland.net/mailman/listinfo/plug
|