Sarod Yatawatta on Wed, 23 Oct 2002 22:20:09 -0400 |
Why don't you use the serial port? remove the keyboard. plug in a console to the serial port of the sun using a null modem cable. boot up the machine. sarod. On Wed, 23 Oct 2002, Tom wrote: > The Sun monitor should use Sync on Green video. Check your dip switches > on the 13W3 to 5BNC cable for settings marked as sync related. > > HTH, > Tom > > > "Joel A. Matz" wrote: > > > > Hello all, > > > > This is more hardware than linux, but only 'cause I can't get to the OS > > side yet... > > > > I recently came into a Sparc Station 20 & an IBM PowerDisplay20 monitor. > > The monitor is a 5 cable BNC, the sparc video a 13W3. Any way to get > > the two together? I have a 13W3 to 5BNC cable with dip switchs but > > don't know which ones to switch or whether it needs to be rewired. > > > > I also have a 13W3 to SVGA adapter but was unable to get a signal on > > several monitors. Possibly the graphics board is dead, but I don't know :( > > > > I'd like to put the box up on my network but can't even see if in boots > > past POST. > > > > This is my first adventure in Sun hardware > > > > Thanks, Joel. > > > > _________________________________________________________________________ > > Philadelphia Linux Users Group -- http://www.phillylinux.org > > Announcements - http://lists.netisland.net/mailman/listinfo/plug-announce > > General Discussion -- http://lists.netisland.net/mailman/listinfo/plug > > _________________________________________________________________________ > Philadelphia Linux Users Group -- http://www.phillylinux.org > Announcements - http://lists.netisland.net/mailman/listinfo/plug-announce > General Discussion -- http://lists.netisland.net/mailman/listinfo/plug > _________________________________________________________________________ Philadelphia Linux Users Group -- http://www.phillylinux.org Announcements - http://lists.netisland.net/mailman/listinfo/plug-announce General Discussion -- http://lists.netisland.net/mailman/listinfo/plug
|
|