|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
I'm using CNet V.90 56K External modem
for INternet dial up access using Red Hat 7.3
2.4.18-3 .
When use wvdial to dial phone# get no carrier.
My line is OK as I use it daily plus occasionally
use for dail up access using motorola modem on Win98.
Have attached some diagnostic info to do the talking.
Any clues to what I may be doing wrong will be
much appreciated.
vin
[root@localhost root]# wvdialconf wvdial.conf
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1 -- ATQ0 V1 E1 -- nothing.
ttyS1<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1 -- ATQ0 V1 E1 -- OK
ttyS1<*1>: ATQ0 V1 E1 Z -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 -- OK
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0 -- OK
ttyS1<*1>: Modem Identifier: ATI -- 1.0
ttyS1<*1>: Speed 2400: AT -- OK
ttyS1<*1>: Speed 4800: AT -- OK
ttyS1<*1>: Speed 9600: AT -- OK
ttyS1<*1>: Speed 19200: AT -- OK
ttyS1<*1>: Speed 38400: AT -- OK
ttyS1<*1>: Speed 57600: AT -- OK
ttyS1<*1>: Speed 115200: AT -- OK
ttyS1<*1>: Max speed is 115200; that should be safe.
ttyS1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0 -- OK
Port Scan<*1>: S3 S4 S5 S6 S7 S8 S9 S10
........................
Found a modem on /dev/ttyS1.
ttyS1<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0"
[root@localhost root]# setserial -a /dev/ttyS1
/dev/ttyS1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
Baud_base: 115200, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
[root@localhost root]# cat /etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/ttyS1
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Phone = 144000
Username = sangam
Password = sangam
Stupid Mode = 0
[root@localhost root]# wvdial
--> WvDial: Internet dialer version 1.41
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT 144000
--> Waiting for carrier.
ATDT 144000
NO CARRIER
--> No Carrier! Trying again.
Caught signal #2! Attempting to exit gracefully... (I typed Ctrl^C)
--> Disconnecting at Sun Jan 5 22:58:15 2003
[root@localhost root]# stty -F /dev/ttyS1 -a
speed 115200 baud; rows 0; columns 0; line = 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W;
lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 hupcl -cstopb cread clocal crtscts
ignbrk -brkint ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff
-iuclc -ixany -imaxbel
-opost -olcuc -ocrnl -onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0
ff0
-isig -icanon -iexten -echo -echoe -echok -echonl -noflsh -xcase -tostop
-echoprt -echoctl -echoke
$minicom -o
Welcome to minicom 2.00.0
OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n
Compiled on Feb 26 2002, 09:38:06.
Press CTRL-A Z for help on special keys
at&v
ACTIVE PROFILE:
B1 E1 L2 M1 N1 T Q0 V1 W0 X4 Y0 &C1 &D2 &G0 &J0 &P0 &Q0 &S0 &U0 &Y0
%A013 %C1 %E1 %G1 \A3 \C0 \G0 \J0 \K5 \N3 \Q3 \T000 \X0 -C0 -J1 "H3 "O032
S00:000 S01:000 S02:043 S03:013 S04:010 S05:008 S06:002 S07:060 S08:002
S09:006 S10:014 S11:070 S12:050 S18:000 S25:005 S30:000 S33:000 S37:000
STORED PROFILE 0:
B1 E1 L2 M1 N1 T Q0 V1 W0 X4 Y0 &C1 &D2 &G0 &J0 &P0 &Q0 &S0 &U0
%A013 %C1 %E1 %G1 \A3 \C0 \G0 \J0 \K5 \N3 \Q3 \T000 \X0 -C0 -J1 "H3 "O032
S00:000 S02:043 S06:002 S07:060 S08:002 S09:006 S10:014
S11:070 S12:050 S18:000 S25:005 S30:000 S33:010 S37:000
TELEPHONE NUMBERS:
&Z0 =
&Z1 =
&Z2 =
&Z3 =
OK
[root@localhost root]# ls -ltr /etc/sysconfig/network-scripts/ifcfg-ppp0
-rw-r--r-- 3 root root 440 Jan 5 22:54
/etc/sysconfig/network-scripts/ifcfg-ppp0
# Please read /usr/share/doc/initscripts-*/sysconfig.txt
# for the documentation of these parameters.
USERCTL='yes'
BOOTPROTO='dialup'
NAME='telecom'
DEVICE='ppp0'
TYPE='Modem'
ONBOOT='no'
BSDCOMP='off'
CCP='off'
VJCCOMP='off'
AC='off'
VJ='off'
PC='off'
LINESPEED='115200'
MODEMPORT='/dev/ttyS1'
DEMAND='no'
PROVIDER='telecom'
DEFROUTE='yes'
PERSIST='no'
PAPNAME='sangam'
WVDIALSECT=telecom
MODEMNAME='Modem0'
PEERDNS='yes'
IDLETIMEOUT=600
[root@localhost root]# cat /etc/ppp/peers/wvdial
noauth
name wvdial
[root@localhost root]# cat /etc/ppp/peers/ppp0
connect "/usr/bin/wvdial --remotename ppp0 --chat 'sangam'"
[root@localhost root]# cat /etc/ppp/pap-secrets
# Secrets for authentication using PAP
# client server secret IP addresses
####### redhat-config-network will overwrite this part!!! (begin) ##########
####### redhat-config-network will overwrite this part!!! (end) ############
_________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.netisland.net/mailman/listinfo/plug-announce
General Discussion -- http://lists.netisland.net/mailman/listinfo/plug
|
|