|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] Disaster Recovery Strategies
|
In that case, you might want to explore using kernel-based Raid-1 mirroring,
which can mirror two partitions so long as they are the same geometry. Of
course, the O/S is still a single point of failure, but at least if a drive
went out, all you'd have to do is make the surviving one disk0 and attach a
new one, set up the partition, and let it rebuild the mirror... that'd
certainly be cheaper :)
E
----- Original Message -----
From: "David Richardson" <dgr24@drexel.edu>
To: <plug@lists.phillylinux.org>
Sent: Thursday, September 02, 2004 12:39 PM
Subject: Re: [PLUG] Disaster Recovery Strategies
> That sounds nice, but I don't see a RAID-5 controller with a hotswap
> chassis in my future. ;)
>
> I should have mentioned, the down time is not the issue. It doesn't
> matter if the machine is down for weeks. I just don't want to have to
> spend more time than is absolutely required to bring the machine back up.
>
> Dave
>
> Eric Hidle wrote:
> > What you really want is a Raid-5 controller with a hotswap chassis for
your
> > drives. 3Ware makes excellent hardware with linux source drivers as
well.
> > It's expensive, but if you want true single-drive-failure-zero-downtime
> > operation, it's the way to go, IMHO. Raid5 has saved my butt on more
than
> > one occasion.
> > E
> >
> > ----- Original Message -----
> > From: "David Richardson" <dgr24@drexel.edu>
> > To: <plug@lists.phillylinux.org>
> > Sent: Thursday, September 02, 2004 11:01 AM
> > Subject: [PLUG] Disaster Recovery Strategies
> >
> >
> >
> >>I have a linux machine that I would like to be able to completely
> >>restore to its current configuration in the event of a hard drive
> >>failure. I'd like to be able to just pop in a new hard drive, and have
> >>it magically work like the old one without the need to manually install
> >>or configure software.
> >>
> >>I was thinking about just using dd to copy the entire hard drive on the
> >>currently working machine to a file and then if I ever need to put in a
> >>new drive just using dd to write the contents of the old drive onto the
> >>new drive. Is it a problem if the new drive is a different size than
> >>the old? Or does anyone have a suggest of a better way?
> >>
> >>Thanks,
> >>Dave
> >>
> >
> >
___________________________________________________________________________
> >
> >>Philadelphia Linux Users Group --
> >
> > http://www.phillylinux.org
> >
> >>Announcements -
> >
> > http://lists.phillylinux.org/mailman/listinfo/plug-announce
> >
> >>General Discussion --
> >
> > http://lists.phillylinux.org/mailman/listinfo/plug
> >
> >
> >
___________________________________________________________________________
> > Philadelphia Linux Users Group --
http://www.phillylinux.org
> > Announcements -
http://lists.phillylinux.org/mailman/listinfo/plug-announce
> > General Discussion --
http://lists.phillylinux.org/mailman/listinfo/plug
>
___________________________________________________________________________
> Philadelphia Linux Users Group --
http://www.phillylinux.org
> Announcements -
http://lists.phillylinux.org/mailman/listinfo/plug-announce
> General Discussion --
http://lists.phillylinux.org/mailman/listinfo/plug
>
___________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|