|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] OT: UDMA Problem
|
Mike Leone wrote:
You did read this, right?
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q297185
CAUSE
This behavior can occur if either of the following conditions is true:
. Your computer uses an Ultra Direct Memory Access (UDMA) hard disk
controller, and the following conditions are true:
. You use a standard
40-wire connector cable to connect the UDMA drive to the controller instead
of the required 80-wire, 40-pin cable.
. The basic input/output system (BIOS) settings are configured to force the
faster UDMA modes.
. The file system is damaged and cannot be mounted
Yes. This is definitely a WinXP/SP2 issue. SuSE can read the NTFS
partition in UDMA mode. The drive worked fine in UDMA mode with FAT32
before the conversion to NTFS.
___________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|