|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
(Sorry for the html,
but I thought it would make this easier to read.)
I am trying to use k3b. I have successfully used xcdroast and
gnomebaker on this system with the same media I am now trying to use.
Here is the k3b output:
<long version>
Devices
-----------------------
SAMSUNG CD-R/RW
SW-252B R701 (/dev/hdc, ) at /media/cdrom0 [CD-R; CD-RW; CD-ROM]
[CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; RAW/R96R]
System
-----------------------
K3b Version: 0.11.23
KDE Version: 3.4.0
QT Version: 3.3.3
Kernel:
2.6.10-5-386
cdrecord
-----------------------
/usr/bin/cdrecord:
Warning: Running on Linux-2.6.10-5-386
/usr/bin/cdrecord:
There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If
you have unexpected problems, please try Linux-2.4 or Solaris.
/usr/bin/cdrecord:
Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord:
Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord:
WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target:
-2 lun: -2
Warning: Open by
'devname' is unintentional and not supported.
Linux sg driver
version: 3.5.27
/usr/bin/cdrecord:
Warning: using unofficial version of libscg (ubuntu-0.8ubuntu1
'@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J.
Schilling').
SCSI buffer size:
64512
Cdrecord-Clone
2.01a38 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of
cdrecord is an unofficial (modified) release of cdrecord
and thus may
have bugs that are not present in the original version.
Please send bug
reports and support requests to <cdrtools@packages.debian.org>.
The original
author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version
'ubuntu-0.8ubuntu1'.
Driveropts: 'burnfree'
atapi: 1
Device type :
Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info :
'SAMSUNG '
Identifikation :
'CD-R/RW SW-252B '
Revision :
'R701'
Device seems to be:
Generic mmc CD-RW.
Current: 0x000A
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A
(current)
Using generic
SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags :
MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO
PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size :
1359872 = 1328 KB
FIFO size :
4194304 = 4096 KB
/usr/bin/cdrecord:
Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord:
Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord:
WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord:
Trying to use ultra high speed medium on improper writer.
/usr/bin/cdrecord:
fifo had 64 puts and 0 gets.
/usr/bin/cdrecord:
fifo was 0 times empty and 1 times full, min fill was 0%.
Track 01: data 348
MB
Total size: 399
MB (39:37.24) = 178293 sectors
Lout start: 400
MB (39:39/18) = 178293 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing
power: 6
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type:
Ultra High speed Rewritable media (2)
ATIP start of lead
in: -11744 (97:25/31)
ATIP start of lead
out: 359848 (79:59/73)
1T speed low: 16 1T
speed high: 16
2T speed low: 8 2T
speed high: 24
power mult factor:
1 4
recommended
erase/write power: 3
A1 values: 66 18 B8
A2 values: 38 80 00
A3 values: 04 CF 88
Disk type: Phase
change
Manuf. index: 40
Manufacturer:
INFODISC Technology Co., Ltd.
Blocks total: 359848
Blocks current: 359848 Blocks remaining: 181555
Forcespeed is OFF.
BURN-Free was never
needed.
cdrecord comand:
-----------------------
/usr/bin/cdrecord.mmap
-v gracetime=2 dev=/dev/hdc speed=10 -dao driveropts=burnfree -eject
-overburn -data -tsize=178293s -
mkisofs
-----------------------
178293
INFO: ISO-8859-1
character encoding detected by locale settings.
Assuming ISO-8859-1
encoded filenames on source filesystem,
use -input-charset
to override.
Using
ELECTRIC_MASADA_1994_09_000.OGG;1 for
/electric-masada_1994-09-xx_d4_t02.ogg
(electric-masada_1994-09-xx_d1_t04.ogg)
0.28% done,
estimate finish Tue Oct 4 15:28:16 2005
0.56% done,
estimate finish Tue Oct 4 15:28:16 2005
0.85% done,
estimate finish Tue Oct 4 15:28:16 2005
1.13% done,
estimate finish Tue Oct 4 15:28:16 2005
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui
-graft-points -volid K3b data test -volset -appid K3B THE CD KREATOR
VERSION 0.11.23 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher
-preparer K3b - Version 0.11.23 -sysid LINUX -volset-size 1
-volset-seqno 1 -sort /tmp/kde-arthur/k3bgYCyFb.tmp -rational-rock
-hide-list /tmp/kde-arthur/k3bbHfnCb.tmp -full-iso9660-filenames
-iso-level 2 -path-list /tmp/kde-arthur/k3bErVGra.tmp
/home/arthur/.kde/share/apps/k3b/temp/dummydir0/
</long version>
Here is what I think the problem is:
<short version>
...
/usr/bin/cdrecord: Trying to use
ultra high speed medium on improper writer.
...
ATIP info from disk:
...
Disk sub
type: Ultra High speed Rewritable media (2)
...
</short version>
But this is 24x media and this is a 52x/24x cdwriter and has written to
this media before.
Any ideas?
--
_______________________________________
Art Alexion
Arthur S. Alexion LLC
arthur [at] alexion [dot] com
aim: aalexion
sms: 2679725536 [at] messaging [dot] sprintpcs [dot] com
PGP fingerprint: 52A4 B10C AA73 096F A661 92D2 3B65 8EAC ACC5 BA7A
The attachment -- signature.asc -- is my electronic signature; no need for alarm.
Info @ http://mysite.verizon.net/art.alexion/encryption/signature.asc.what.html
Key for signed PDFs available at
http://mysite.verizon.net/art.alexion/encryption/ArthurSAlexion.p7c
The validation string is TTJY-ZILJ-BJJG.
________________________________________
|
Attachment:
signature.asc
Description: OpenPGP digital signature
___________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|