|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] Asterisk setup
|
Mark,
The asterisk mailing list archive will be an invaluable resource for
you. I am currently setting up an Asterisk PBX for an office with the
following hardware (server isn't solely for Asterisk use):
Cisco 7960G phones (5)
Digium AEX800 card (for FXO only)
Quad core XEON 2.5Ghz processor
8 GB ram
3ware 9650SE with 7, 500GB sataII drives
As you see I'm using an FXO card so I will be tapping into traditional
POTS lines. I've heard mostly good things about Broadvoice as a sip
upstream, but that is only hearsay.
Feel free to e-mail me if you have any setup questions.
--Dayton
Mark Baker wrote:
>
> Has anyone on the list setup a pbx through asterisk? If so, could you
> give me a rundown on what hardware you used and what sip upstream
> providers are on the top tier?
>
>
>
> --Mark
>
>
>
> ------------------------------------------------------------------------
>
> ___________________________________________________________________________
> Philadelphia Linux Users Group -- http://www.phillylinux.org
> Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
> General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
>
___________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|