[PLUG] HighPoint RovketRaid Controller and sata_mv module

[Edward Heaney <edhe@verizon.net>]

Hi,
    lspci -v shows that the controller needs sata_mv; and that it is in
use. However, lsmod shows that sata_mv is not being used. The Controller
is recognized on start-up, but the Vista drive, which is connected to
it, is not recognized.

Edward

*lspci -v
*
01:06.0 SCSI storage controller: HighPoint Technologies, Inc. RocketRAID
1740 (rev 02)
Subsystem: Marvell Technology Group Ltd. Device 11ab
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fdd00000 (64-bit, non-prefetchable) [size=1M]
I/O ports at c800 [size=256]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [60] PCI-X non-bridge device
Kernel driver in use: sata_mv
Kernel modules: sata_mv
*
lsmod*
...
sata_nv 27528 8
ata_generic 10116 0
forcedeth 54032 0
ide_pci_generic 9220 0 [permanent]
ide_core 128284 2 amd74xx,ide_pci_generic
*sata_mv 29452 0*
libata 165472 3 sata_nv,ata_generic,sata_mv
scsi_mod 160760 4 sg,sr_mod,sd_mod,libata
dock 14112 1 libata
...
___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug