Art Alexion on 12 Oct 2009 11:27:55 -0700


[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

[PLUG] boot issue with IDE drives


My system has a couple of SATA drives.  The one mainboard IDE port is 
connected to a DVD+RW.  I had two older IDE drives connected to an older 
Promise PCI/IDE card.  At some point a couple of months ago, the system 
stopped booting before it even got to grub.  My first suspicion was a problem 
with the IDE drives.

I unplugged them one at a time, and still no boot.  Plugged in the promise 
card and the system booted fine.  I replaced the card.  With the new card, it 
got to the point where it recognized the PCI card BIOS, but would not load 
grub. The system boots fine with the card installed, but no drives plugged 
in.

Both IDE drives are working fine when plugged into a USB enclosure.

Last year, a failing BIOS chip caused me to think that I was having drive 
problems.  This led me to try a bunch of ways of reinstalling grub.  Turned 
out to be the BIOS chip, and when I got a replacement, everything has worked 
fine.

I suspect that the current boot problem is related to the system looking for 
grub on one of the IDE drives and not finding it.  Grub on the intended boot 
SATA drive is working fine. 

Does this make sense?  Is there a way to insure that only the grub on the SATA 
drive is used for booting when the IDE drives are plugged in?  The main BIOS 
does not see the IDE drives on the PCI card so that setting won't help.

Attachment: signature.asc
Description: This is a digitally signed message part.

___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug