David Coulson on 25 Feb 2011 12:10:10 -0800

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

Re: [PLUG] Add an HDD to a diskless cluster node?

You're missing these modules. Check /etc/modules.conf or /etc/modprobe.conf from the system that is working and compare it to a system that is not. Maybe manually modprobe for mptsas on the box that is not working and see if it detects the disk.

You probably still also have to configure the array via the LSI Logic, since the system that is working will most likely see a 'virtual disk array' rather than a real physical disk.

On 2/25/11 3:03 PM, Doug Stewart wrote:
mptsas                 59857  1
mptscsih               57921  1 mptsas
mptbase                88033  2 mptsas,mptscsih
scsi_transport_sas     64961  1 mptsas
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug