Walt Mankowski via plug on 29 Aug 2020 13:05:57 -0700


[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

Re: [PLUG] Can I use these 2 sets of DIMMs together?


Well, I decided to give it a try and it seems to have worked just
fine.

Walt

On Sat, Aug 29, 2020 at 03:16:24PM -0400, Walt Mankowski via plug wrote:
> Thanks Keith,
> 
> I think I must not have been clear. My box currently has 2 x 8 GB DIMMs and 2 empty slots. I bought 4 x 8 GB DIMMs. If I can use them together, then the box will have 4 x 8 GB DIMMS (2 old DDR3L and 2 new DDR3). I'll return the other 2 x GB DIMMs and get back about $60.
> 
> Walt
> 
> On Sat, Aug 29, 2020, at 3:08 PM, Keith C. Perry wrote:
> > I just recently retested my thoughts on this for a workstation I have to George, so for what it is worth...
> > 
> > The best case scenario is of course to use the same spec memory in all slots- (trivial solution I know but said for the record).
> > 
> > Barring that, the next more important thing is to use the same pairs and then the same speed memory.
> > 
> > I would check to make sure your motherboard can use a 2 x 8Gb and a 2 x 16Gb kit but would think it would work.
> > 
> > Doing a memory test before you install the kit and after you install the kit will tell you if you are degrading performance with the new kit.
> > 
> > 
> > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> > Keith C. Perry, MS E.E.
> > Managing Member, DAO Technologies LLC
> > (O) +1.215.525.4165 x2033
> > (M) +1.215.432.5167
> > www.daotechnologies.com
> > 
> > 
> > *From: *"Walt Mankowski via plug" <plug@lists.phillylinux.org>
> > *To: *plug@lists.phillylinux.org
> > *Sent: *Saturday, August 29, 2020 2:47:58 PM
> > *Subject: *[PLUG] Can I use these 2 sets of DIMMs together?
> > 
> > Hi,
> > 
> > I went to Microcenter today and bought some RAM, with the intention of upgrading my Linux box from 16 to 32 GB. I thought I had 4 4-GB DIMMs so I bought 4 8-GB DIMMs. But when I got home and opened up my box, I discovered that what I actually had was 2 8-GB DIMMs and 2 empty slots. My question is whether I can use 2 of the DIMMs I just bought and return the other two.
> > 
> > Here's what I currently have: https://www.crucial.com/memory/ddr3/ct2k102464bd160b/ct8966767
> > 
> > Here's what I just bought (2 packages): https://www.microcenter.com/product/509757/neo-forza-encke-16gb-(2-x-8gb)-ddr3-1600-pc3-12800-cl11-dual-channel-desktop-memory-kit-nmud380d8116cc2---gold#
> > 
> > The specs look identical as far as I can tell. I'm a bit worried about the heat sink on the new DIMMs but they look like they should fit.
> > 
> > Thanks.
> > 
> > Walt
> > 
> > ___________________________________________________________________________
> > Philadelphia Linux Users Group         --        http://www.phillylinux.org
> > Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
> > General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug

> ___________________________________________________________________________
> Philadelphia Linux Users Group         --        http://www.phillylinux.org
> Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
> General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug

Attachment: signature.asc
Description: PGP signature

___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug