Re: [Plug] Linux/W95 LAN

["Andy Bradley" <ajb237@psu.edu>]

Does anyone live near Nick who owns a set of cable testers?

I live in West Chester and can borrow a set.  In just a few minutes we can
tell if it is the cables.

Andy Bradley
----- Original Message -----
From: Nick R <laktar@hotmail.com>
To: <plug@lists.nothinbut.net>
Sent: Monday, August 23, 1999 1:47 AM
Subject: Re: [Plug] Linux/W95 LAN


> None taken. But what exactly makes cables not work? Assuming that the
little
> light on the hub goes on, then it's just gotta be too high resistance,
> right? What's the maximum resistance that you can have for them to still
> work for 10Base-T? How about 100 Base-T? That's something that I can test
> for easily.
>
> >From: "Thomas E. Keiser" <tek@teklogic1.com>
> >Reply-To: plug@lists.nothinbut.net
> >To: plug@lists.nothinbut.net
> >Subject: Re: [Plug] Linux/W95 LAN
> >Date: Sun, 22 Aug 1999 23:30:34 -0400
> >
> >If you made your own cables using traditional fittings, it's fairly
likely
> >(don't
> >take this personally) they won't work. I say this based upon years of
> >trying to do
> >this, and finally going to pre-made patch cables, and using Panduit
> >mini-com
> >connectors for in-wall wiring. Even if you only value your own time at
> >$5/hour,
> >this makes sense.
> >
> >John Nolan wrote:
> >
> > > >
> > > > Well all of these are cables I made so I don't have any proof that
any
> >of
> > > > them work and I don't have anything to hook them up to that I know
> >works on
> > > > the software side. One of them even runs up through my ceiling, in
my
> >attic,
> > > > and then back downstairs. I doubt I could get it out.
> > >
> > > If you can't remove the cables and hook them to another network,
> > > then borrow some (working) cables from someone, and set up your
> > > network using those cables first.   Move your computers into
> > > the same room temporarily just so that you can do this,
> > > hook them up with your friend's cables, and then tinker with
> > > the network settings.  When everything is working properly,
> > > then shut your computers down and reconnect them using your wires.
> > >
> > > --
> > > ##--------------------------------
> > > ##  John Nolan
> > > ##  jpnolan op net
> > > ##--------------------------------
> > >
> > > _______________________________________________
> > > Plug maillist  -  Plug@lists.nothinbut.net
> > > http://lists.nothinbut.net/mail/listinfo/plug
> >
> >--
> >************************************************
> >Thomas E. Keiser
> >tek@teklogic1.com
> >
> >
> >
> >_______________________________________________
> >Plug maillist  -  Plug@lists.nothinbut.net
> >http://lists.nothinbut.net/mail/listinfo/plug
>
>
> _______________________________________________________________
> Get Free Email and Do More On The Web. Visit http://www.msn.com
>
> _______________________________________________
> Plug maillist  -  Plug@lists.nothinbut.net
> http://lists.nothinbut.net/mail/listinfo/plug
>



_______________________________________________
Plug maillist  -  Plug@lists.nothinbut.net
http://lists.nothinbut.net/mail/listinfo/plug