|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] Re: Hardware Recommendations
|
Nit picking...
>From my experience monitor switches cause distortion.
I wouldn't suggest using anti-static bags for insulation. The bags dissipate
static charge because they are semi-conductive. Paper would make a better
insulator. But, it really doesn't matter because CD-ROM drives are enclosed in
a metal shroud.
> May I suggest that since you really only need the CD when you're installing
> that you just open up the case, borrow an IDE CD ROM from another computer,
> plug the CD ROM and IDE into your open case (you may want to use some
> anti-static bags if you have them to create a rest for your loose CD
> Drive). Install. When you are done, remove the CD Drive and ribbon cable.
> Close your case. Done, cost $0.
>
> If you do want to spend money I suggest either replacing your case (as I
> think someone else did) or buying another computer, youc an buy a used PII
> on EBay for about $100 plus shipping. A two unit Monitor switch should run
> about $30 at a show.
______________________________________________________________________
Philadelphia Linux Users Group - http://www.phillylinux.org
Announcements-http://lists.phillylinux.org/mail/listinfo/plug-announce
General Discussion - http://lists.phillylinux.org/mail/listinfo/plug
|
|