Michael Leone on Sun, 12 May 2002 17:26:37 -0400 |
On Sun, 2002-05-12 at 16:37, pinkee@cavegirl.org wrote: > I purchased a onte; pro100 nic, that is supported by my debian system, I > have the correct modules up, but when it comes time to pull a ip from > the dhcp server it just doesn't. Does any other machine? (just wondering if your FHCP might not be working correctly) > It is a nic with a dongle, and I get > green lights when I execite pump and I even occasionally get an ip, but > when i check ifconfig I am only tx, no rx at all. > > Any advice would be much appreciated. I am at a loss now. You should have a bunch of DHCP messages in /var/log/syslog on your DHCP server: May 12 06:29:25 workhorse dhcpd-2.2.x: DHCPDISCOVER from 00:c0:15:00:a3:e1 via eth0 May 12 06:29:25 workhorse dhcpd-2.2.x: DHCPOFFER on 192.168.100.50 to 00:c0:15:00:a3:e1 via eth0 May 12 06:29:25 workhorse dhcpd-2.2.x: DHCPDISCOVER from 00:c0:15:00:a3:e1 via eth0 May 12 06:29:25 workhorse dhcpd-2.2.x: DHCPOFFER on 192.168.100.50 to 00:c0:15:00:a3:e1 via eth0 May 12 06:29:25 workhorse dhcpd-2.2.x: DHCPREQUEST for 192.168.100.50 from 00:c0:15:00:a3:e1 via eth0 May 12 06:29:25 workhorse dhcpd-2.2.x: DHCPACK on 192.168.100.50 to 00:c0:15:00:a3:e1 via eth0 Or similar. Anything interesting there? -- PGP Fingerprint: 0AA8 DC47 CB63 AE3F C739 6BF9 9AB4 1EF6 5AA5 BCDF PGP public key: <http://www.mike-leone.com/~turgon/turgon-public-key.gpg> Conform or be cast out. Attachment:
signature.asc
|
|