Mental Patient on Thu, 3 Jul 2003 14:34:05 -0400 |
Anyone out there with a working athlon / via82xx onboard sound setup? I'm using alsa 0.9.4 / kernel 2.4.20. There aren't kernel drivers for the card yet, but supposedly it works in alsa. Whenever I start alsa, I get the following in my messages: Jul 3 14:27:25 crabby kernel: PCI: Found IRQ 4 for device 00:11.5 Jul 3 14:27:25 crabby kernel: IRQ routing conflict for 00:11.5, have irq 7, want irq 4 Now, there isn't a way to specify what irq to use on the commandline. At least according to modinfo. /sbin/modinfo snd-via82xx filename: /lib/modules/2.4.20/kernel/sound/pci/snd-via82xx.o description: "VIA VT82xx audio" author: "Jaroslav Kysela <perex@suse.cz>" license: "GPL" parm: index int array (min = 1, max = 8), description "Index value for VIA 82xx bridge." parm: id string array (min = 1, max = 8), description "ID string for VIA 82xx bridge." parm: enable int array (min = 1, max = 8), description "Enable audio part of VIA 82xx bridge." parm: mpu_port long array (min = 1, max = 8), description "MPU-401 port." parm: ac97_clock int array (min = 1, max = 8), description "AC'97 codec clock (default 48000Hz)." parm: dxs_support int array (min = 1, max = 8), description "Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only)" I haven't noticed a way to change it in the bios.... so I'm stuck. My extra sblive! is in storage and I'd really rather not dig it out... but I'm starting to run out of ideas. Anyone have suggestions? -- Mental (Mental@NeverLight.com) Thank you for saving me from myself; Your compassion became its own hell Unequivocably beautiful inside and out, without a doubt --Type O Negative, Nettie CARPE NOCTEM, QUAM MINIMUM CREDULA POSTERO. GPG public key: http://www.neverlight.com/pas/Mental.asc _________________________________________________________________________ Philadelphia Linux Users Group -- http://www.phillylinux.org Announcements - http://lists.netisland.net/mailman/listinfo/plug-announce General Discussion -- http://lists.netisland.net/mailman/listinfo/plug
|
|