John Fiore on 29 Dec 2003 20:49:02 -0000 |
I've used a couple of the Promise cards in the last few years. They're recognized without any trouble. --- Michael Lazin <michael@lazinweb.homelinux.net> wrote: > I called technical support on this issue and they > insist that this is a > bios limitation and I need a controller card. This > leads me to this > question, what would be a ATA-100 controller card to > use with Linux? > > Thanks, > > Michael > > > On Dec 29, 2003, at 8:49 AM, Tom Diehl wrote: > > > On Sun, 28 Dec 2003, Jesse Huestis wrote: > > > >> Hi > >> > >> Jeff has some very good advice. > >> > >> Can you see the drive correctly in the systems > BIOS? > >> > >> Jeff, > >> > >> I am wondering, as I have had the same problem > with some older > >> machines > >> and the ATA 133 drives, do the other *FDISK > programs see the drive > >> correctly even if teh BIOS does not? > > > > You should be able to set the bios to type none > and linux should > > detect it > > properly. Assuming you are not trying to boot from > the thing. > > > > HTH, > > > > ............Tom > > > _______________________________________________________________________ > > > ____ > > Philadelphia Linux Users Group -- > > http://www.phillylinux.org > > Announcements - > > > http://lists.phillylinux.org/mailman/listinfo/plug-announce > > General Discussion -- > > http://lists.phillylinux.org/mailman/listinfo/plug > > > > ___________________________________________________________________________ > Philadelphia Linux Users Group -- > http://www.phillylinux.org > Announcements - > http://lists.phillylinux.org/mailman/listinfo/plug-announce > General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug ___________________________________________________________________________ Philadelphia Linux Users Group -- http://www.phillylinux.org Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|