|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] Postfix question
|
On Fri, 27 Feb 2004, Jesse Huestis wrote:
> I will take a look at the previous thread.
>
> Anyone have have experience with Ethernet gigabit setup. Again this is
> a SuSE Linux box, ona newer HP Server. I have a Gigabit switch, but the
> card is running at 100mb.
>
> Any ideas?
What kind of card is it? I've had success with Broadcom, Intel,
and SysKonnect gigabit cards with a Dell gigabit switch. Some of the
drivers have flags you can set in modules.conf/modprobe.conf to affect the
connection speed, duplex, autodetection, etc. The available flags are
usually documented in the kernel source under Documentation/networking/
Aaron
___________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|