Art Alexion on 9 Dec 2005 15:51:52 -0000


[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

Re: [PLUG] lm_sensors and fan speed


Mark M. Hoffman wrote:

>Hi Art:
>
>* Art Alexion <art.alexion@verizon.net> [2005-12-08 09:29:59 -0500]:
>  
>
>>I set up lm_sensors with a display in the KDE panel, everything seems
>>fine, except the fan occasionally slows down for a few seconds.  No
>>noise.  Should I be concerned?  Temp remains constant at safe levels.  I
>>have the side off the tower which should help with temp.
>>    
>>
>
>Did you notice this only *after* you set up lm_sensors?  
>
Yes.

>If so, what kind
>of hardware monitoring chip do you have?
>  
>
Don't know.

>The standard questions...
>
>What version of lm_sensors? 
>
2.8.8-7ubuntu2.1

>Installed from source or distro package?
>  
>
.deb

>What kernel version?
>  
>
2.6

>What did sensors-detect report?
>  
>
Driver `eeprom' (may not be inserted):
  Misdetects:
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x50
    Chip `SPD EEPROM' (confidence: 1)
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x51
    Chip `SPD EEPROM' (confidence: 1)
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x52
    Chip `SPD EEPROM' (confidence: 1)
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x53
    Chip `SPD EEPROM' (confidence: 1)
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x54
    Chip `SPD EEPROM' (confidence: 1)
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x55
    Chip `SPD EEPROM' (confidence: 1)
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x56
    Chip `SPD EEPROM' (confidence: 1)
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x57
    Chip `SPD EEPROM' (confidence: 1)

Driver `ddcmon' (should be inserted):
  Detects correctly:
  * Bus `I810/I815 DDC Adapter' (Algorithm unavailable)
    Busdriver `i2c-i810', I2C address 0x50 (and 0x51 0x52 0x53 0x54 0x55
0x56 0x57)
    Chip `DDC monitor' (confidence: 8)

Driver `w83781d' (may not be inserted):
  Misdetects:
  * ISA bus address 0x0290 (Busdriver `i2c-isa')
    Chip `Winbond W83627HF' (confidence: 8)

Driver `w83627hf' (should be inserted):
  Detects correctly:
  * ISA bus address 0x0290 (Busdriver `i2c-isa')
    Chip `Winbond W83627HF Super IO Sensors' (confidence: 9)



>Did you modify /etc/sensors.conf at all?  
>  
>
No.

>Also, do you mind if I CC the lm_sensors mailing list?
>  
>
No. Don't mind.

>Regards,
>
>  
>


-- 

_______________________________________
Art Alexion
Arthur S. Alexion LLC

PGP fingerprint: 52A4 B10C AA73 096F A661  92D2 3B65 8EAC ACC5 BA7A
The attachment -- signature.asc -- is my electronic signature; no need for alarm.
Info @ http://mysite.verizon.net/art.alexion/encryption/signature.asc.what.html

Key for signed PDFs available at
http://mysite.verizon.net/art.alexion/encryption/ArthurSAlexion.p7c
The validation string is TTJY-ZILJ-BJJG.
________________________________________

Attachment: signature.asc
Description: OpenPGP digital signature

___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug