Re: [PLUG] Single Port KVM - IP based

[Matt Ayres <matta@tektonic.net>]

W. Chris Shank wrote:
> I'm looking for an inexpensive solution for remote access to PC or 
> server at the console level. I'm envisioning a small box with KVM 
> inputs on one side and ethernet on the other. You would then use 
> somethink like VNC to access the console of the PC.
>
> Why single port? Because it should only be used as a temporary way to 
> access a PC or server remotely for troubleshooting. Using the RAC 
> cards is not an option because it's not practical to install the card 
> into random machines when this capability is needed.
>
> From what I can gather, what I want doesn't exist, but this comes 
> pretty close: 
> http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP5456
> There are many solutions that are 8 or 16 ports and are REALLY 
> expensive. I just need one port.

Sure, here you go:

http://www.avocent.com/web/en.nsf/Content/DSR1024

Regards,
Matt
___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug