cjohnson19791979@gmail.com on 20 Aug 2009 16:58:15 -0700


[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

Re: [PLUG] Retrofit IDE with SATA?


i've used 3ware cards for many cases like this.




This message was sent from my Treo® wireless handheld device.

-----Original Message-----
From: Casey Bralla <MailList@nerdworld.org>
Sent: Thursday, August 20, 2009 7:56  PM
To: PLUG Philadelphia Linux Users Group <PLUG@lists.phillylinux.org>
Subject: [PLUG] Retrofit IDE with SATA?

Tom's Hardware is running a story about how smart it is to upgrade your hard 
drive.  (Hmm.. sounds like they're pulling the old PC Mag trick of endorsing 
buying more stuff all the time.. how shocking!)

I've been looking to upgrade the capacity of my file server disks, but the 
motherboards my servers use are too old to have SATA interfaces.  Most newer 
disk drives all seem to be SATA.

Has anybody tried a SATA adapter card to see if you get anything like 
reasonable performance if your motherboard does not have native SATA ports?
-- 

Casey Bralla
Chief Nerd in Residence
The NerdWorld Organisation

http://www.NerdWorld.org
___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug
___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug