|
[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]
|
Re: [PLUG] OT: Old Jet Direct setup
|
Art Alexion had this to say:
On Sunday 07 February 2010 12:51:24 Mike Leone wrote:
SM could be Subnet Mask, but SM followed by LG makes me think it is SMall
and LarGe. GW = default gateway?
Yes
Thanks Michael, but did you mean SM = Subnet Mask or SM = SMall? And it it is
Subnet Mask, what would I do with LG?
Configuring
TCP/IP parameters
Using the control panel of your printer,
you can manually configure these TCP/IP parameters:
| Parameter
|
Description
|
| BOOTP |
YES (default) enables
TCP/IP
configuration automatically from the network. If BOOTP=YES*, none of
the remaining parameters can be configured.
NO disables BOOTP, and allows you to configure the remaining parameters
from the printer’s control panel. |
| IP Address |
The Jetdirect card’s
unique TCP/IP network address, consisting of 4 bytes:
IP BYTE1.IP BYTE2.IP BYTE3.IP BYTE4
(example: 015.024.227.113). |
| Subnet Mask |
A bit mask filter used
to identify the subnet of the Jetdirect card if subnetting is used,
consisting of 4 bytes:
SM BYTE1.SM BYTE2.SM BYTE3.SM BYTE4
(example: 255.255.248.0) |
| Syslog Server IP
Address |
The IP address of the
log server to be used by the Jetdirect card consisting of 4 bytes:
LG BYTE1.LG BYTE2. LG BYTE3.LG BYTE4 |
| Default Gateway |
The IP address of the
gateway used to communicate with stations outside the local subnet
consisting of 4 bytes:
GW BYTE1.GW BYTE2.GW BYTE3.GW BYTE4 |
| Timeout |
The TCP/IP idle
time-out period (in seconds). The value can range from 0 to 3600. The
default is 90.
If
set to "0", the timeout feature of the HP Jetdirect card is
disabled--TCP/IP connections will remain open until closed by the
server. |
<http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpj05217>
|
___________________________________________________________________________
Philadelphia Linux Users Group -- http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion -- http://lists.phillylinux.org/mailman/listinfo/plug
|
|