Fred K Ollinger on 21 Jan 2005 19:03:10 -0000


[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

Re: [PLUG] eth card identification


I just ran into this problem the other day.

Basically, I would load one driver at a time and get that card working
then the other.

In debian you can force the proper loading by putting a file called

eth0 in

/etc/modutils

The file says:

cat /etc/modutils/eth0

alias eth0 tulip

also

$ cat eth1

alias eth1 sis900

Next run:

update-modules

Now you know which is which.

No need to open case unless you physically do not know what card is which.

Fred


Fred Ollinger (follinge@diadig.com)

On Thu, 13 Jan 2005, Jason Costomiris wrote:

> On Thu, 13 Jan 2005 13:14:20 -0500, Art Alexion <art.alexion@verizon.net> wrote:
> > what tool can I use to identify?  Strangely, I have both cards now
> > configured for lan, rp-pppoe works anyway, and samba won't start.
>
> Probably the simplest way that doesn't involve opening up the machine
> to look at the MAC address on the cards is to just unplug one of them
> and see which network croaks.  As long as this isn't a
> mission-critical machine we're talking about here, you should be able
> to do this without causing a lot of trouble..
>
> --
> Jason Costomiris <><
> E: jcostom {at} gmail {dot} com / W: http://www.jasons.org/
> 186,000 miles per second. It's not just a good idea, it's the law.
> ___________________________________________________________________________
> Philadelphia Linux Users Group         --        http://www.phillylinux.org
> Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
> General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug
>
___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug