Robert on 12 Nov 2016 13:31:20 -0800


[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]

[PLUG] Gentoo


So I finally installed Gentoo on my desktop.  Was wondering if anyone
using Gentoo could help me with ensuring that my make.conf is optimally
setup for my system?

My CPU is as follows:

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 30
model name      : Intel(R) Core(TM) i7 CPU         860  @ 2.80GHz
stepping        : 5
microcode       : 0x3
cpu MHz         : 2808.824
cache size      : 8192 KB
physical id     : 0
siblings        : 8
core id         : 0
cpu cores       : 4
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl
xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est
tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida dtherm
tpr_shadow vnmi flexpriority ept vpid
bugs            :
bogomips        : 5617.64
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:


My make.conf is as follows:

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-march=native -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before
changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE and USE_EXPAND flags that were used for
# buidling in addition to what is provided by the profile.
#USE="-abi_x86_32 python icu bindist mmx sse sse2 X aac alsa bzip2
encode gpl hardcoded-tables iconv mp3 network opengl postproc sdl
threads truetype vorbis x264 xcb xvid zlib avahi zeroconf snmp"
#CPU_FLAGS_X86="mmx sse sse2"
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"
MAKEOPTS="-j9"
VIDEO_CARDS="nouveau"
INPUT_DEVICES="evdev mouse keyboard"
USE="X aac alsa bzip2 encode gpl hardcoded-tables iconv icu mp3 network
opengl postproc pulseaudio sdl threads truetype vorbis x264 xcb xvid
zlib pam perl server xml"
CPU_FLAGS_X86="mmx mmxext sse sse2"
ABI_X86="64"
FFTOOLS="aviocat cws2fws ffescape ffeval ffhash fourcc2pixfmt graph2dot
ismindex pktdumper qt-faststart sidxindex trasher"
SANE_BACKENDS="hp"

GENTOO_MIRRORS="http://mirror.leaseweb.com/gentoo/
http://mirrors.evowise.com/gentoo/ http://mirrors.rit.edu/gentoo/";


Thanks for your help.



-- 

Regards,

Robert


Smile, it increases your face value.........

___________________________________________________________________________
Philadelphia Linux Users Group         --        http://www.phillylinux.org
Announcements - http://lists.phillylinux.org/mailman/listinfo/plug-announce
General Discussion  --   http://lists.phillylinux.org/mailman/listinfo/plug