[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: One off Pi Day




On Monday, September 16, 2019 at 8:39:24 AM UTC-7, goossbears wrote:

On Monday, September 16, 2019 at 8:11:46 AM UTC-7, atn wrote:
"Berkeley Raspberry Pi Meeting"
  Excellent.  Looks good.
and can make it into a folded sign with
both sides printed.        Alan

Same all around for me too ("impeccable", "excellent", "looks good", ... etcetera.)

The only suggestion on top of making it into a folded sign with both sides
printed is to maybe add three or five extra blank lines between each side
and to then add a visible foldline directly through the middle. 
Some people get fancy by doing a foldline of equal signs with the obvious
message "FOLD HERE" in the middle of the line for further emphasis, like so...
"=======================  FOLD HERE  ======================="
IMHO, the foldline doesn't really have to get that fancy; a simple line of
dashes running across the middle of the page does just fine.

-A

Oh, and please don't forget that if it's going to be a folded sign, you/whoever-else
might want to reverse the current orientation of each side of the sign 180 degrees
so that when it's printed out and folded in the middle, the current top half ends up
appearing correct side up after the fold and the current bottom half ends up
appearing correct side up.

--
You received this message because you are subscribed to the Google Groups "BerkeleyLUG" group.
To unsubscribe from this group and stop receiving emails from it, send an email to berkeleylug+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/berkeleylug/5b23495d-e917-40d0-8fd9-64de38575129%40googlegroups.com.